Short answer:If a magnetic cat screen has lifted corners, gaps at the edges, or cannot adhere properly, first secure the opening and keep cats away, then check whether there is any visible debris or whether it was not reset as demonstrated after cleaning. Do not rely on adding magnets, tape, or pressing the edges hard as a fix; repeated loosening, shifting, or peeling of the fixing surface requires contact for inspection.

There is a gap at the edge; why is it not suitable to keep the window open?

A complete mesh in the middle does not mean the perimeter is still fixed as designed. If you find an opening that differs from the original, first close the window if it can be done safely, and restrict the cat’s access; do not wait until it starts scratching the edge before handling it.

If the window sash is also abnormal, do not force it to operate. First keep the current condition, and explain to the team whether the window body and the mesh surface both have problems at the same time.

First recall when the abnormality appeared

Note whether it was just removed for washing, the curtains were moved, furniture was moved, there was impact, or other work was carried out. This information can help understand the changes before and after, but it cannot directly prove a single cause.

For example, if a corner lifts after cleaning, you may need to check the direction, alignment and joining surface; do not therefore assume on your own that a stronger magnet alone will solve it.

What details can be seen without dismantling?

  • Whether there is any visible loose debris or fabric fibres at the joining surface.
  • Whether the overall direction and corners are consistent with the original demonstration.
  • Whether the frame or coating is peeling, deformed, or loose.

Only handle surface debris that the product instructions allow and that can be safely touched. Do not remove unfamiliar adhesive strips, magnetic strips or fixing parts, and do not scrape the surface with fingernails or a blade.

After cleaning, can you realign it yourself?

Only if you already understand the correct removal and reinstallation method for that model, and there is no deformation, damage or abnormal fixing surface, should you restore it according to the original demonstration. Do not twist the entire frame just to flatten one corner.

If there is still a gap after resetting, if it comes loose repeatedly, or if extra force is needed, stop using it and ask about it. A momentary suction hold does not prove that the problem has been solved.

Why is it not recommended to add tape or extra magnets?

Temporary materials may change the original joining method, and may also cover areas that need to be checked; they cannot automatically restore the original scheme’s usage conditions. Do not continue to let cats approach by “temporarily holding it up.”

In rented homes especially, the surface condition should be preserved, and tape or modifications should not be added without knowing whether they are suitable. Responsibility for removal and repairs should also be confirmed with the landlord and the team first.

How do you clearly explain the edge issue?

Provide photos of the whole window, raised corners and fixing surface, mark the room and direction, and explain whether it was discovered after cleaning and whether the window can currently be closed. Do not pull the gap wider or lean out to take photos.

The SPCA’s window protection recommendations are not support certification for magnetic products; daily self-checks also cannot replace window inspection. Before handling, first stop using the relevant opening, and that is the starting point for follow-up.

Useful links and reference sources